Head Protection

Cairns® N5A New Yorker™ Leather Fire Helmet

Every handcrafted Cairns N5A New Yorker Leather Fire Helmet meets current OSHA requirements and offers the high quality and appearance that generations of firefighters have trusted since 1836. Each New Yorker leather helmet is handcrafted, shaped, stitched, and trimmed to last for years with minimum maintenance. As of September 2018, all Cairns® N5A New Yorker™ Fire Helmets will feature replaceable soft goods, which are easy to remove and clean. In alignment with cancer prevention directives recommended by the Firefighter Cancer Support Network (FCSN), adding replaceable soft goods to this iconic fire helmet helps firefighters better maintain the character of this leather fire helmet while improving safety. Now available: The Bronx Bend! Order your Cairns N5A New Yorker Fire Helmet with the historical “rolled” brim style direct from the MSA fire helmet factory. Both the MSA Cairns N5A New Yorker Fire Helmet (OSHA compliant) and the N6A Houston Fire Helmet (NFPA 1971 compliant) are now available with a Bronx Bend (large and medium sizes).
view details

1 Touch® Suspension

Getting a better helmet fit is easier thanks to this one-handed, adjustable helmet suspension system. Features one-handed squeeze opening, slide adjustment and snap closure. Available as an option on standard V-Gard®, SmoothDome®, Topgard®, Thermalgard®, Skullgard®, and Comfo Cap® helmets.
view details

Cairns® 1010 Pink Presentation Helmet

The Cairns 1010 Pink Fire Helmet is constructed from a hard durable shell, finished with high-gloss pink paint, white edge trim and a carved brass eagle fire helmet front holder. The pink fire helmet design is for presentation purposes only and should not to be used as personal protective equipment.
view details

Cairns® Fire Helmet Replacement Chin Straps

A variety of chin strap replacement part options are available for use with Cairns fire helmets. Use only genuine MSA Cairns replacement parts to ensure proper functioning and compliance of your fire helmet.
view details

Cairns® Fire Helmet Soft Goods Kits & Replacement Earlaps

In alignment with cancer prevention directives recommended by the Firefighter Cancer Support Network (FCSN), MSA adds replaceable soft goods to better maintain the character of your fire helmets while helping to improve safety. Ensure proper functioning and compliance of your fire helmet by using only genuine MSA Cairns Fire Helmet Accessories and Replacement Parts such as Cairns Helmet Soft Goods Kits and Replacement Earlaps. For your convenience, a full soft goods kit consists of everything needed to replace your liner and earlaps including a handy laundering bag.
view details

Chinstraps for MSA Hard Hats

Put and keep MSA helmets in their place with these comfortable, adjustable chinstraps. Available in two styles; suspension-attached and shell-attached.
view details

Comfo-Cap® Hard Hat

A favorite for head protection in the mining industry for its low crown clearance ideal for low-ceiling areas, the Comfo-Cap offers two suspenstion options and comes standard with a lamp bracket and cord holder.
view details

Defender® Visor for Cairns® 1010 and 1044 Helmets

The Defender Visor stays clean inside your fire helmet until needed for overhaul and non-IDLH search-and-recovery. Sleek and attractive design allows for fast, easy raising and lowering of the fire helmet visor even with gloved hands.
view details

Fas-Trac® Suspension

This premium suspension liner includes headband, nape strap, sweatband and crown straps. One-handed ratchet adjuster provides an easy-to-use, comfortable fit. Designed for easy clip-in to the V-Gard hat or cap shell.
view details

Helmet Customization - Reflective Striping

Add any of 27+ different reflective and retro-reflective stripes to your helmet. MSA reflective stripes help enhance the visibility of workers in daytime conditions.     
view details

Helmet Customization - Retro-Reflective Striping

In many outside working conditions, wearing high-visibility clothing is essential to ensure safety. MSA retro-reflective helmet striping helps increase the visibility of the wearer, especially in low light conditions where they enhance contrast.
view details

Helmet Lights and Slot Adapters

MSA offers helmet lights fit with our specially designed helmet light holders (shown, but must be purchased separately). Our lights are FM and CSA compliant for intrinsic safety. Non-incendive.
view details

Lamp Attachments

 MSA light holders and brackets are designed specifically for use with MSA helmets.
view details

Medical Information Carrier System

This small, inexpensive hardhat accessory can save lives because it provides crucial medical and contact information in the event of an emergency. Tucks inside the helmet shell. Includes a polyolefin film data form, heavy-duty neon carrier, high-tech tape and reflective helmet decal. An MSA exclusive in industrial environments.
view details

MSA Cairns® Front Holders

Used exclusively with Cairns Traditional and Leather Fire Helmets (N5A New Yorker, N6A Sam Houston, Cairns 1010, 1044 and 880 Traditional). MSA Fire Helmet Front and Shield Holders divert energy from your head, neck and spine during an impact or acceleration hazard.
view details

NFPA Compliant Bourkes for MSA Cairns Fire Helmets

Introducing NFPA compliant Bourkes for MSA Cairns® 1010, 1044, and 880 Tradition fire helmets. Combining the traditional look of Bourkes Eyeshields that were invented in the 1960s with modern materials, the NFPA compliant Bourkes satisfy the eye/face protection requirements as prescribed by NFPA-1971:2018, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting. In addition to being compliant to NFPA-1971:2018, the NFPA compliant fire helmet Bourkes are also compliant to ANSI/ISEA Z87.1:2015 as an impact protector (Z87+).
view details

Skullgard® Full Brim Hard Hats

Designed to offer outstanding protection in hot and dangerous industries, the Skullgard Protective Hat sets the standard for environments such as steel mills. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
view details

Skullgard® Hard Hat Cap Style

Designed to offer outstanding protection in hot and dangerous industries, the Skullgard Protective Cap sets the standard for environments such as steel mills. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
view details

SmoothDome® Slotted Hard Hat Cap Style

The SmoothDome® Slotted Caps are welcomed by welders for their smooth crown and light weight. The SmoothDome offers comfortable head protection for workers in industries who need head protection from small falling objects.
view details

Specialty V-Gard® Hard Hats

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
view details

Staz-On® Suspension

This suspension liner includes headband, nape strap, sweatband and adjustable crown straps. Designed for easy clip-in to the V Gard hat or cap shell, users can adjust the liner for a secure and comfortable fit.
view details

Sun Shields

Sun Shields extend the brim of  V-Gard and Topgard protective caps all the way around to help protect wearer's ears and neck from sun's rays. Made of ABS (front portion is polycarbonate, smoke tint).
view details

SunShades

MSA SunShades not only help to protect wearer’s ears and neck from sun and heat, but also enhance worker visibility with contrasting color band and reflective striping. Fit most hats and caps.
view details

Super V Hard Hat Cap Style

The Super-V is MSA's V-Gard Hard Hat with Type II approval. With ANSI and CSA approvals the Super-V is the best hard hat choice when protecting from top and lateral/side impacts. The world recognized trademark "V" design is known for comfort, quality and durability. MSA has sold well over 100 million V-Gard Hard Hats since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites.
view details

Terri-Band Sweatbands

Protect eyes and face from sweat and drips with these absorbent and comfortable sweatbands. Easily snaps into all MSA industrial helmets. Makes helmets fit better, too. Machine washable.
view details

Thermalgard® Hard Hat Cap Style

When workers need a helmet with elevated temperature capability, the Thermalgard® Protective Cap provides protection in a high-strength, smooth crown helmet. The glass-reinforced nylon shell has a beaded edge for improved rigidity. Slots in the cap allow for mounting hearing protection muffs, welding shields, and faceshields.
view details

V-Gard® 500 Non-Vented Full Brim Hard Hats

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
view details

V-Gard® 500 Non-Vented Hard Hat Cap Style

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
view details

V-Gard® 500 Vented Full Brim Hard Hats

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
view details

V-Gard® 500 Vented Hard Hat Cap Style

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
view details
Product Comparison Queue (0) Compare Products