MSA Cairns® Fire & Rescue Helmets

Fire Helmets

Cairns® 1010 Pink Presentation Helmet

Cairns® 1010 Pink Presentation Helmet

The Cairns 1010 Pink Fire Helmet is constructed from a hard durable shell, finished with high-gloss pink paint, white edge trim and a carved brass eagle fire helmet front holder. The pink fire helmet design is for presentation purposes only and should not to be used as personal protective equipment.
Cairns® Fire Helmet Replacement Chin Straps

Cairns® Fire Helmet Replacement Chin Straps

A variety of chin strap replacement part options are available for use with Cairns fire helmets. Use only genuine MSA Cairns replacement parts to ensure proper functioning and compliance of your fire helmet.
Cairns® Fire Helmet Replacement Soft Goods

Cairns® Fire Helmet Replacement Soft Goods

In alignment with cancer prevention directives recommended by the Firefighter Cancer Support Network (FCSN), MSA adds replaceable soft goods to better maintain the character of your fire helmets while helping to improve safety. Ensure proper functioning and compliance of your fire helmet by using only genuine MSA Cairns Fire Helmet Accessories and Replacement Parts such as Cairns Helmet Soft Goods Kits and Replacement Earlaps. For your convenience, a full soft goods kit consists of everything needed to replace your liner and earlaps including a handy laundering bag.
MSA Cairns® Front Holders

MSA Cairns® Front Holders

Used exclusively with Cairns Traditional and Leather Fire Helmets (N5A New Yorker, N6A Sam Houston, Cairns 1010, 1044 and 880 Traditional). MSA Fire Helmet Front and Shield Holders divert energy from your head, neck and spine during an impact or acceleration hazard.
Cairns® 1010 Traditional Composite Fire Helmet

Cairns® 1010 Traditional Composite Fire Helmet

Constructed from through-color fiberglass composite material, the high-performance, luster finish design of the Cairns 1010 Fire Helmet resists cracking and chipping. Offered in eight colors, MSA Cairns 1010 Fire Helmet is one of our most popular for structural and proximity firefighting.
Cairns® Invader 664 Composite Fire Helmet

Cairns® Invader 664 Composite Fire Helmet

Engineered to fit a wide variety of head sizes for a proper SCBA mask fit, the impact cap of the Cairns Invader 664 Composite Fire Helmet provides superior impact and thermal head protection. Its patented shell release allows escape from snag hazards. Non-corroding, through-color fiberglass composite of this modern fire helmet shell resists cracking and chipping. Available with MSA's popular Defender Visor, which can easily be raised or lowered with a gloved hand.
Cairns® N6A Houston™ Leather Fire Helmet

Cairns® N6A Houston™ Leather Fire Helmet

Compliant to NFPA 1971, 2018 Edition for structural firefighting. The N6A Houston Leather Fire Helmet offers the high quality and appearance that generations of firefighters have trusted since 1836. As of September of 2018, all Cairns® N6A Houston™ Fire Helmets will feature replaceable soft goods, which are easy to remove and clean. In alignment with cancer prevention directives recommended by the Firefighter Cancer Support Network (FCSN), adding replaceable soft goods to this iconic fire helmet helps firefighters better maintain the character of the leather fire helmet while improving safety. Now available: The Bronx Bend! Order your Cairns N6A Houston Fire Helmet with the historical “rolled” brim style direct from the MSA fire helmet factory. Both the MSA Cairns N5A New Yorker Fire Helmet (OSHA compliant) and the N6A Houston Fire Helmet (NFPA 1971 compliant) are now available with a Bronx Bend (large and medium sizes).
Cairns® 880 Traditional Thermoplastic Fire Helmet

Cairns® 880 Traditional Thermoplastic Fire Helmet

The tough, high-temperature thermoplastic fire helmet shell is resistant to chipping and cracking.
Cairns® Commando™ HP3 Composite Fire Helmet

Cairns® Commando™ HP3 Composite Fire Helmet

This low-profile, lightweight Cairns Fire and Rescue Helmet meet NFPA 1951-2013 requirements (USAR), as well as NFPA 1971-2018. The brimless design allows for easy access to confined spaces and vehicle extrications.
Cairns® 360S Structural Thermoplastic Fire Helmet

Cairns® 360S Structural Thermoplastic Fire Helmet

Its lightweight design makes the 360S Fire Helmet the perfect search and rescue helmet for confined space and EMS work alike.
Cairns® Rescue 360R Fire Helmet

Cairns® Rescue 360R Fire Helmet

Meets NFPA 1951-2013 requirements (USAR), as well as NFPA 1971-2018. The lack of brim on the back of the helmet affords use in confined space and other emergency situations where there is little room to move.
Cairns® Rescue 360R-13 Helmet

Cairns® Rescue 360R-13 Helmet

This low-profile thermoplastic helmet is specifically designed for rescue usage. Complies with Standard on Protective Ensembles for Technical Rescue Incidents (NFPA 1951-2013).
Cairns Firefighter Goggles

Cairns Firefighter Goggles

Constructed of flame-retardant material and certified to withstand temperatures up to 500°F for up to five minutes. Features easy lens replacement, anti-fog, anti-scratch coatings, and ballistic-grade, optically correct lenses. These Firefighter Goggles are easy to don and doff, even with gloved hands. Choose from InnerZone One, InnerZone Two, InnerZone Three and ESS Fire Goggle models.
Cairns® Fire Helmet Fronts

Cairns® Fire Helmet Fronts

The lettering and panels are available in Scotchlite reflective material with millions of possible configurations available. Options include standard fronts and printed gold leaf fronts for the 4", 6", and 8" sizes.
Select up to 3 items to compare Compare (0)