Featured
HazardWatch Fire and Gas System
1 Part Number(s)
An innovative, modular system that combines highly reliable programmable logic controller (PLC) technology with our advanced gas and flame field devices. It is highly scalable, making it suitable for small systems to large plant-wide applications. Offering intelligence, flexibility and reliability, the HazardWatch System's controller hardware configuration and software has been tested by Factory Mutual to verify NFPA 72 compliance.
Featured
General Monitors S5000 Gas Monitor
1 Part Number(s)
It operates over a wide temperature range using a variety of gas sensing technologies. Breakthrough XCell® gas sensors with TruCal® technology extends calibration cycles up to 18 months and actively monitors sensor integrity for ultimate peace of mind.
Featured
FL500 UV/IR Flame Detector
1 Part Number(s)
The FL500 UV/IR Flame Detector monitors for radiation emitted by a flame in both the ultraviolet (UV) and infrared (IR) spectral ranges. This UV/IR combination provides a fast response time and increased false alarm immunity against sources of radiation for reliable protection.
Featured
G1 ExtendAire II System
2 Part Number(s)
The all new MSA G1 ExtendAire II System is an Emergency Breathing Supply System (EBSS) accessory that uses intermediate pressure air to provide firefighters with emergency breathing air.
Featured
FL4000H Multi-spectrum IR Flame Detector
1 Part Number(s)
The FL4000H is an advanced multi-spectrum infrared (MSIR) flame detector that provides superior false alarm immunity with the widest field of view. The FL4000H employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources. The FL4000H detects typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. It can also see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
Featured
Senscient ELDS™ Open Path Gas Detector
1 Part Number(s)
The Senscient ELDS laser-based open path gas detector is available for a wide range of toxic and flammable gases. The Senscient ELDS uses 'SimuGas' self-testing to eliminate employees entering hazardous areas for gas checks. Nuisance false alarms are virtually eliminated with its breakthrough Harmonic Fingerprint processing.
Featured
IR400 Point IR Gas Detector
2 Part Number(s)
The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features an industry-leading response time of ≤ 3 seconds, even with a splash guard installed. All electronics are contained within an explosion-proof housing so that the IR400's detector information can be processed locally. Configurations with analog output, Modbus and HART are also available.
Topgard® Full Brim Hard Hats
26 Part Number(s)
These protective hats are specially designed for use in elevated temperature environments and wherever dielectric protection is needed. Retains limited resistance to top impact or penetration over a wide range of temperatures.
10024323
HAT, TOPGARD, W/RATCHET SUSPENSION,WHITE
448900
HAT,TPGRD.LAMP BRKT.YELL.
448901
HAT,TPGRD.LAMP BRKT.GRAY
448905
HAT,TPGRD.LAMP BRKT.RED
454712
Topgard Non-Slotted Hat, Yellow, w/1-Touch Suspension
454713
Topgard Non-Slotted Hat, Gray, w/1-Touch Suspension
454714
HAT,TOPGRD.1 TOUCH SUSP.BLUE.
454716
HAT TOPGARD ORANGE 1 TOUCH SUSPENSION
454717
HAT TOPGARD GREEN 1 TOUCH SUSPENSION
454718
HAT TOPGARD RED 1 TOUCH SUSPENSION
454719
Topgard Non-Slotted Hat, White, w/1-Touch Suspension
454720
HAT TOPGARD BLACK W/1-TOUCH SUSPENSION
475387
Topgard Non-Slotted Hat, Yellow, w/Fas-Trac III Suspension
475388
HAT, TOPGARD, FAS-TRAC III, GRAY
475389
HAT, TOPGARD, FAS-TRAC III, BLUE
475390
HAT,TOPGARD,W/RATCHET SUSPENSION,ORANGE
475391
HAT, TOPGARD, FAS-TRAC III, GREEN
475392
HAT, TOPGARD, FAS-TRAC III, RED
475393
Topgard Non-Slotted Hat, White, w/Fas-Trac III Suspension
475394
HAT, TOPGARD, FAS-TRAC III, BLACK
804397
Topgard Non-Slotted Hat, Orange, w/Fas-Trac III Suspension
816295
HAT,TOPGARD,YEL,ROCHESTER
C211080
HAT, TOPGARD, LB/CH, FAS-TRAC III, YELLOW
C211084
HAT T/G ORANGE LB & CH F/T
C211086
HAT, TOPGARD, LB/CH, FAS-TRAC III, RED
C211087
HAT, TOPGARD, LB/CH, FAS-TRAC III, WHITE
ARGC - Automatic Remote Gas Calibrator
2 Part Number(s)
To verify the proper operation of a catalytic combustible gas sensor, it is necessary to periodically apply a gas of known concentration to the sensor. This is usually done manually at the site with gas supplied from a small lecture bottle. As the sensor reacts to the calibration gas, adjustments are made to the monitoring system to bring its calibration into agreement with the known concentration of gas. At times, sensors are mounted in inaccessible locations, requiring expensive catwalks or scaffolding to reach them. The Automatic Remote Gas Calibrator (ARGC) allows the calibration gas to be applied to the catalytic bead sensor from easily accessible locations. The ARGC is used for blocking ambient air and redirecting methane to the catalytic sensor for calibration or testing sensor accuracy. The ARGC tests or calibrates the General Monitors catalytic sensor with 50% LEL methane. The unit is capable of calibrating gas at wind velocities up to 50 mph. Note: the RGC (P/N 80153-1), used manually with a pressure regulator (P/N 80147-1), is suitable for calibrating with any light hydrocarbon.
FL3101H UV Flame Detector
2 Part Number(s)
The FL3101H is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response. Configurations with dual Modbus and HART are available. Modbus and HART data can be used for predictive maintenance. The flame detector's electronics are integral within its explosion-proof housing, allowing detector information to be processed at the point of detection.
Discontinued
TS4000H Toxic Gas Detector
1 Part Number(s)
The TS4000H Intelligent Toxic Gas Detector continuously monitors a variety of toxic gases in the ppm range or oxygen deficiency, delivering highly accurate detection and protection. The unit features one person calibration and virtually self-calibrates by simply activating a magnetic switch and applying gas. It provides status indication and alarm outputs. Configurations with relays, Modbus, and HART are available to meet many needs.
IR4000S-CO2 Single Point Gas Monitor
1 Part Number(s)
The IR4000S CO2 Single-Point Monitor is a display and user interface for the IR700 carbon dioxide gas detector. The monitor allows local calibration and displays gas concentration. Relays are optional. The relays provide output for Alarm, Warn, and Fault conditions.
Observer-i Ultrasonic Gas Leak Detector
1 Part Number(s)
Instantly detect pressurized gas leaks with this high-precision, omni-direction acoustic detector utilizing Gassonic ultrasonic technology. Works even when traditional methods of gas detection are unsuitable or dependent on ventilation. Features Artificial Neural Network (ANN) technology that distinguishes between real gas leaks and false alarm sources without requiring any in-field training. The Observer-i UGLD provides an industry-leading detection range (up to 28 m) reducing the number of detectors required. Ideal for use in complex, outdoor pipeline systems.
Supreme® Pro Earmuff
2 Part Number(s)
The Supreme level dependent ear muffs protect from hazardous noise while allowing users to hear surrounding sounds. By wearing Supreme ear muffs you can communicate face-to-face as well as hearing commands and instructions without removing the hearing protector, even when others are shooting.
FL3100H-H2 UV/IR Flame Detector for Hydrogen Applications
2 Part Number(s)
The FL3100H-Hydrogen is an Ultraviolet / Infrared flame detector designed specifically to detect hydrogen (H2) fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects H2 fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. Configurations with dual Modbus and HART are available. Modbus and HART data can be used for predictive maintenance. The flame detector's electronics are integral within its explosion-proof housing, allowing detector information to be processed at the point of detection.
S4000TH H2S Gas Detector
2 Part Number(s)
The S4000TH Intelligent Gas Sensor is a microprocessor-based transmitter designed for use with General Monitors' thin film metal oxide semiconductor (TFMOS) sensors to detect H2S gas. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It detects hydrogen sulfide in 0-20 ppm, 0-50 ppm or 0-100 parts per million (ppm) levels over a wide temperature range.
MC600 Multi-Channel Controller
1 Part Number(s)
The MC600 is a microprocessor-based multi-channel controller that provides six channels of continuous gas detection. It can be configured as either a local gas detection system, or it can be networked to provide a large plant-wide distributed safety system. It is compatible with our hydrocarbon sensors, H2S sensors, as well as our S4000CH, S4100C, S4000TH, S4100T, IR400, IR5500, IR700, TS4000H, Observer, and Surveyor gas detectors.
Topgard® Hard Hat Cap Style
16 Part Number(s)
Made of durable polycarbonate and featuring a uniridge design, these caps are specialty designed for use by utilities and other industries where head protection with dielectric protection is necessary. Retains limited resistance to top impact or penetration over a wide range of temperatures. Available in slotted or non-slotted design in a variety of colors.
448914
Topgard Slotted Cap, White, w/lamp bracket and cord holder, w/1-Touch Suspension
454721
Topgard Slotted Cap, Yellow, w/1-Touch Suspension
454722
Topgard Slotted Cap, Gray, w/1-Touch Suspension
454723
Topgard Slotted Cap, Blue, w/1-Touch Suspension
454725
Topgard Slotted Cap, Orange, w/1-Touch Suspension
454726
Topgard Slotted Cap, Green, w/1-Touch Suspension
454727
Topgard Slotted Cap, Red, w/1-Touch Suspension
454728
Topgard Slotted Cap, White, w/1-Touch Suspension
475378
Topgard Slotted Cap, Yellow, w/Fas-Trac III Suspension
475379
Topgard Slotted Cap, Gray, w/Fas-Trac III Suspension
475380
Topgard Slotted Cap, Blue, w/Fas-Trac III Suspension
475382
Topgard Slotted Cap, Orange, w/Fas-Trac III Suspension
475383
Topgard Slotted Cap, Green, w/Fas-Trac III Suspension
475384
Topgard Slotted Cap, Red, w/Fas-Trac III Suspension
475385
Topgard Slotted Cap, White, w/Fas-Trac III Suspension
804396
Topgard Slotted Cap, Bright Orange, w/Fas-Trac III Suspension
580A Dual-Channel Combustible Gas Monitor
2 Part Number(s)
The 580A is a compact, highly-versatile system for continuously monitoring combustible gas (hydrocarbon) concentrations in two locations. The system consists of two remote catalytic sensing assemblies and a solid-state controller. The controller automatically displays the higher reading channel on a digital display, scaled from 0-100% LEL (lower explosive limit). Manual override switching permits readout of the low channel at any time.
Zero Two Series Gas and Flame Detection System
1 Part Number(s)
Modular system offering the widest range of control cards for use in an integrated fire and/or gas detection system. The Zero Two Series system can monitor any combination of the following: combustible gas, H2S, toxic gas, ultrasonic, oxygen deficiency and flame detection. In addition, its open architecture allows the system to accommodate other sensing devices for tasks such as smoke detection, heat detection and manual call points.
